offering our services

As the title says anything that you need done to your evo we can do it and will beat most prices. Turbo kit installs,top of the motor rebuild, ect,ect just pm me for questions and prices. It is me and sabastian458 that are doing this. He used to be a mechanic at easly mitsubishi. We have all of the special tools needed for cams,clutch installs, anything with a mitsubishi


The only thing we wont do is: Rebuild turbo,Rebuild motor,or Rebuild t-case


Together we have about 5 or 6 cam installs have it done to be done in a little over an hour

3 or 4 clutch installs, and we have had the head off of our cars numerous times

no job would be too small

also we have a tatrix cable and a guy that has been to school for tunning to datalog your car and if u get cams installed we can make sure everything is running right so you will make it to get a custom tune

I'm gonna need a clutch soon.......

I know, I'll just bring Matt (touringbubble) and come up for the weekend. We can do GSC cams, clutch, new injectors, FMIC, and a new turbo!!!!

Then Matt can tune me on the way home!!!

We might need to talk about that ...

Also no transmission rebuilds. And keep in mind these prices are you coming to us. I would bank on cam installs with out Brandon's friend tuning to take about 2 hours. Clutch jobs are going to be an all day thing, head jobs depends on if the head needs resurfaced. We can even do brake jobs and if wanted, reclear the calipers. We can even do minor electrical installs too.

PM either me or upstateevosc with what ever you have a question on.

i might get you guys to do my clutch

head jobs. ha ha.

will you guys come to atlanta and offer these services? maybe we can set up a few cars that need work and get you guys to come down here...

we would have to see what what kinda work would be needed so we can know what kinda tools to bring. But i would say yes if you guys can work something out with me and will. We are really easy to get along with

LayinLo wrote:

I know, I'll just bring Matt (touringbubble) and come up for the weekend. We can do GSC cams, clutch, new injectors, FMIC, and a new turbo!!!!

Then Matt can tune me on the way home!!!

yeah you would most likely have to stay the weekend

whatever you guys want just work something up and if you wanna see our work in action me and will are going to be at tunerfest running my car which both of us have a lot of hours on

On the ATL thing, it really depends on what type of work is needed. Clutches will be really hard to do off site. (just ask brandon how heavy the Fing transfer case is) Smaller things like turbo installs, injectors, cams and things of that nature I dont see a problem. But if the repair takes more than a day (unforseen issues and such) Ya gotta give us a place to bunk

How much are we talking for a clutch install?

I will pm you later today after I talk with brandon. It will be arround lunch time. Also, are you providing the clutch and fluid (trans, t/c)?

Can you guys install an O2 Housing as well?

ATL people, post here if you need to get some work done so we can get will and sabastian over here!

yup, we can. just make sure that you have the 3 gaskets needed (manifold to hotside, hotside to housing, housing to downpipe) 2 flat gaskets, 1 donut gasket

Where can I get those gaskets? I only have the one that came with the 02 housing and the stock ones.. I shouldn't re-use the stock gaskets?


btw, is there anyway to stay logged in everytime i come to the site?

use firefox to saty logged in, I could never stay logged in using IE

How close 2 Charlotte are ya'll

Firefox FTMFW!
I can't remember when I last used IE.

oh and Firefox has spell check, haahha.

we are about 2 hours away.

how many miles do you have on your evo, rich? the one that came with the housing should be the one that goes between the housing and hotside, is that the one you have? if you have less than 30k then I wouldnt see a problem in reusing those 2 stock gaskets, if more than that I really would replace them. (if you have an aftermarket downpipe and you replaced the donut gasket then, dont worry about that one.)

evoark wrote:

How close 2 Charlotte are ya'll

What are you interested in getting done?

We will also supply the parts for yall but you will have to pay for them

Also i will have to talk to will about posting the prices (i really dont care) But i promise you will be happy. On clutches we are about 200 bucks cheaper than dealership and the more that you get done the more we will cut you a brake on the prices

hey man how much for clutch install?

hook me up~! its a evo 9 MR. youve seen it b4.